Hyd-Mech S20A Series II Saw

SPECIFICATIONS:
(SAE)

  • Blade Size: 1” x 14’ 10”
  • Blade Drive: 5 HP VFD
  • Machine Voltage: 208, 240, 480, 575 v
  • Blade Speed: 75-330 SFM
  • Coolant Tank Capacity: 12 Gallons
  • Work Load: 5,000 lbs.
  • Machine Weight: 3,800 lbs.
  • Table Height: 31”
  • Dimensions (w x l x h): 93” x 86” x 52

Capacity

90°
45°
30°

Rectangular (h x w)

13" x 18"
13" x 10 3/4"
13" x 7 3/4"

Round

13"
12"
8 1/2"
 

Schenk - HM40B/CAB820H Balancer

SPECIFICATIONS:
(SAE)

Bed Length up to 10’
Max. Weight of 6.500 lbs.
Max. Diameter of 6”
Max. Shaft Size of 10”
Information requirements for all balancing jobs include the following:
  • Weight 
  • Maximum RPM
  • ISO Specs.
 

RK Machinery 30 Ton Press HFP-30 MWH

 

Haas ST-30 CNC Lathe

SPECIFICATIONS:
(SAE)

  • Spindle bore: 3.5”
  • Spindle motor: 30HP
  • Spindle speed: 3,400 RPM
  • Turret stations: 12
  • Max. turning diameter: 21.0”
  • Swing over apron: 31.75”
  • Max. turning length: 26.0”
  • Dist. between centers: 30”
  • Approximate machine weight: 14,300 lbs

Equipped With:

  • HAAS CNC Control
  • Tool Presetter
  • Tailstock
  • Chip Conveyor
 

Hass TL-3W CNC Toolroom Lathe

SPECIFICATIONS:
(SAE)

  • Maximum Swing Over Front Approx: 30"
  • Swing Over Cross Slide: 18"
  • Maximum Cutting Diameter: 30"
  • Maximum Turning Length Centers: 60"
  • Spindle Bore: 3.5"
  • Spindle Motor: 30 HP
  • Spindle Speeds: 1800 RPM
  • X Axis Travel: 16"
  • Z Axis Travel: 60"
  • Rapid Traverse Rate X & Z Axes: 150"/min.
 

Haas CNC TM-3P Mill

SPECIFICATIONS:
(SAE)

Travels 

  • X Axis Travel: 40.0”
  • Y Axis Travel: 20.0”
  • Z Axis Travel: 16.0”
  • Spindle Nose to Table (max): 20.0 in

Table 

  • Length: 57.8”
  • Width: 14.5”
  • T-Slot Width: 0.626” to 0.630”
 

Johnford Vertical Mill DMC-1600H

SPECIFICATIONS:
(SAE)

  • X Axis Travel: 63.0”
  • Y Axis Travel: 51.0”
  • Z Axis Travel: 32.0”
  • Table Load: 13,200 lbs
  • Rapids (in. per min.): 590
  • Spindle Drive Type: 2-speed gearbox
 

Hyundai WIA Horizontal Turning Center - L700LMA

SPECIFICATIONS:
(SAE)

  • Max. Turning Diameter 36.22"
  • Max. Turning Length 128"
  • Chuck Size 24"
  • X Axis Travel – 19.7"
  • Z Axis Travel – 129"
  • Rapid Travel (X, Z) – 472"/min.
 

Hardinge-Bridgeport Series I Milling Machine